HF-Gen. 15 kW Air cooled with furnace for
preheating of finger joints.

The HF-generator DHA 150 has a rated output of max. 15 kW. The generator is enclosed in a aluminum cabinet. Two sides of the generator are fitted with removable panels. Controls, instruments and mains connections are placed on
the front of the generator, and the HF-terminal on the opposite side. One side of the generator are fitted with three air filters. The heated air is distributed out through the roof and through the
HF-terminal. The airflow through the HF-terminal decreases the condensation in the electrode system. The generator is equipped with grid control to adjust the grid current for different boards.

Technical data:

Generator:

Electrical connection: as specified 220-500V, 3-phase, 50 Hz or 60 Hz.
Power consumption at maximum output power: 30 kVA.
Frequency: app. 27,12 MHz.
Oscillator tube: ITL 12-1.
Rectifiers: Silicon diodes.
Weight: app. 450 kg.

Furnace:

Capacity: 7 kg wood per minute are heated 60 °C.
Board ends from 20 - 130 mm
Lenght of electrode: 1700 mm.
Weight: app. 120 kg.